WebVirtMgr添加多台KVM主机
2021-02-04 02:16
标签：already oca uuid 登录 user broadcast dsa cst rop 重启网卡： eno16777736: flags=4163 lo: flags=73 virbr0: flags=4099 三、新建50-libvirt-remote-access.pkla文件并配置SSH 回到webvirtmgr主机，进行设置： Number of key(s) added: 1 Now try logging into the machine, with: "ssh ‘172.16.41.30‘" 无密码连接测试： Number of key(s) added: 1 Now try logging into the machine, with: "ssh ‘root@172.16.41.30‘" -bash-4.2$ ssh root@172.16.41.30 四、在WebVirtMgr添加新KVM主机 WebVirtMgr添加多台KVM主机 标签：already oca uuid 登录 user broadcast dsa cst rop 原文地址：https://blog.51cto.com/3001441/2505047
172.16.41.232为WebVirtMgr以及KVM主机，系统环境为centos7.7
172.16.41.30为KVM主机，系统环境为centos7.2
部署172.16.41.30为KVM主机：
二、KVM安装这里就不介绍了，可参考KVM之KVM安装部署，直接进行配置。
在新的KVM主机机器上配置虚拟化及网桥环境：
复制网卡：
[root@localhost network-scripts]# cp ifcfg-eno16777736 ifcfg-br0
修改网卡信息：删除IP信息，添加BRIDGE=br0 及NM_CONTROLLED=no信息
[root@localhost network-scripts]# vim ifcfg-eno16777736
TYPE=Ethernet
BOOTPROTO=none
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
NAME=eno16777736
UUID=079a4633-04d6-4c8d-b65d-a803778cdaef
DEVICE=eno16777736
ONBOOT=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
BRIDGE=br0
NM_CONTROLLED=no
~
修改网桥ifcfg-br0信息： 删除原有信息添加以下内容
[root@localhost network-scripts]# vim ifcfg-br0
TYPE=Bridge
DEVICE=br0
NM_CONTROLLED=no
BOOTPROTO=static
NAME=br0
ONBOOT=yes
IPADDR=172.16.41.30
NETMASK=255.255.255.0
GATEWAY=172.16.41.254
DNS1=114.114.114.114
DNS2=233.5.5.5
[root@localhost network-scripts]# systemctl restart network
[root@localhost network-scripts]# ifconfig
br0: flags=4163
inet 172.16.41.30 netmask 255.255.255.0 broadcast 172.16.41.255
inet6 fe80::20c:29ff:fee9:3fc2 prefixlen 64 scopeid 0x20
ether 00:0c:29:e9:3f:c2 txqueuelen 0 (Ethernet)
RX packets 452 bytes 31566 (30.8 KiB)
RX errors 0 dropped 12 overruns 0 frame 0
TX packets 37 bytes 5704 (5.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
inet6 fe80::20c:29ff:fee9:3fc2 prefixlen 64 scopeid 0x20
ether 00:0c:29:e9:3f:c2 txqueuelen 1000 (Ethernet)
RX packets 26188 bytes 1952055 (1.8 MiB)
RX errors 0 dropped 1426 overruns 0 frame 0
TX packets 600 bytes 125506 (122.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 0 (Local Loopback)
RX packets 2 bytes 170 (170.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2 bytes 170 (170.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:e3:79:b8 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
在新KVM主机上新建50-libvirt-remote-access.pkla
[root@localhost ~]# vim /etc/polkit-1/localauthority/50-local.d/50-libvirt-remote-access.pkla
添加以下内容：
[Remote libvirt SSH access]
Identity=unix-user:root
Action=org.libvirt.unix.manage
ResultAny=yes
ResultInactive=yes
ResultActive=yes
修改50-libvirt-remote-access.pkla的归属者（如果时root登录创建的不用执行下面的命令）
[root@localhost ~]# chown -R root.root /etc/polkit-1/localauthority/50-local.d/50-libvirt-remote-access.pkla
[root@localhost ~]# ll /etc/polkit-1/localauthority/50-local.d/50-libvirt-remote-access.pkla
-rw-r--r--. 1 root root 133 6月 4 15:37 /etc/polkit-1/localauthority/50-local.d/50-libvirt-remote-access.pkla
将密钥上传到新KVM主机41.30
[root@localhost ~]# ssh-copy-id 172.16.41.30
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_dsa.pub"
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@172.16.41.30‘s password: #输入新KVM主机的密码
and check to make sure that only the key(s) you wanted were added.
[root@localhost ~]# su - nginx -s /bin/bash
Last login: Wed May 27 10:02:18 CST 2020 on pts/0
-bash-4.2$ ssh-copy-id root@172.16.41.30 #
/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/var/lib/nginx/.ssh/id_rsa.pub"
/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
Warning: Permanently added ‘172.16.41.30‘ (ECDSA) to the list of known hosts.
root@172.16.41.30‘s password:
and check to make sure that only the key(s) you wanted were added.
Warning: Permanently added ‘172.16.41.30‘ (ECDSA) to the list of known hosts.
Last login: Tue Jun 16 15:50:25 2020 from 172.16.41.30
[root@localhost ~]#
[root@localhost ~]#
[root@localhost ~]# ifconfig
br0: flags=4163
inet 172.16.41.30 netmask 255.255.255.0 broadcast 172.16.41.255
inet6 fe80::20c:29ff:fe4b:a94f prefixlen 64 scopeid 0x20
ether 00:0c:29:4b:a9:4f txqueuelen 0 (Ethernet)
RX packets 248504 bytes 124801918 (119.0 MiB)
RX errors 0 dropped 8447 overruns 0 frame 0
TX packets 49570 bytes 4828065 (4.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
